Surge Protector/Lightning Arrester
Features

The EverTime's Lightning Protector Model 1LPK-0008 is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. The unit features a N male (Plug) to N Female (Jack) connector.

Due to its low-cost and superior RF performance this unit is ideal for IEEE 802.11b/g Wireless LAN applications as well as ISM, MMDS, Cellular and PCS applications. Since this protector will pass DC it is suitable for applications where DC is carried through the coax cable such as remote amplifiers and LNA's

The unit's replaceable gas tube element, multi-strike capability and fast response time make it suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing which provides superior grounding.

Electrical Specifications
Frequency Range 0 - 3 GHz
VSRW Less than 1.5
Insertion Loss 0.2 dB
Transmossion Loss -2.5dB
AC Current Range 20A (at voltage release=1S,testing period=5S, testing duration=3 min, per test)
Pulse Current Range 200A (at 10/1000µs, wave=300, testing duration=3 min, pre test)
Impedance 50 Ohm
DC breakdown voltage 230 20% (voltage on upgrade ratio @100V/S)
Impulse breakdown voltage <600V (voltage on upgrade ratio @100V/S)
Gas Tube Insulation Resistance 10,000 M
Overvoltage Protection >150V (100mA, <150ms)
Gap Can <1.5P
 
   
Mechanical Specifications  
Connectors N-Female toN-Male
Connector Body Material Nickel Plated Brass
Body Material Anodized Aluminum
Pin Material Gold Plated Brass
Dimensions (max) 75 mm x 50 mm x 20
Weight 107g




1LPK-5803

Electrical Specification:

Part Number
 1LPK-5803
Frequency 0~6GHz
V.S.W.R
 0~5GHz 1 : 1.5
5~6GHz 1 : 2.0
INSERTION LOSS
 0.5dB
DC breakdown voltage
 90±20% (@100V/S)
Impulse breakdown voltage <600V (@1KV/µs)
AC Discharge Current 5A (@50Hz)
Surge Discharge Current 5KA (@8/20µs)
Insulation Resistance 1000mO
Electrode Capacitance <1.5P

MECHANICAL SPECIFICATION

Connector Type N-Female to N-Male

 

  

 
 


 
 



 LMR-400 cable

High performance cable used in wireless systems. It can be used as antenna cable in professional WLAN networks for frequency 2.4 GHz. LMR-400 is high flexible and maintains its parameters with minimu 1 inch bend radius. It has the lowest loss of any RG8/RG213 'type'cable. LMR-400 is resistant to the full range of outdoor environments. Its coverage results in >90 dB shielding, and whole structure provide excellent phase stability over temperature and with bending.

 

Model No. Specification
1CB-0036 N Male To N Male 3M
1CB-0037 N Male To N Male 6M
1CB-0038 N Male To N Male 9M

 

 

 

  400 3/6/9M test report
 
MODEL NO. : SP-244

Description

SP-244 is a four-port antenna splitter that enables you to operate one radio with four antennas. It is optimized for maximum performance in the 2.4 GHz band. No power supply is required for operation of this splitter.		 Surgen Protector
    

      Features

  • Waterproof enclosure
  • Works equally well for both transmit and receive signals
  • Standard N-female connectors
  • Works with both FHSS and DSSS radio signals
  • Covers the entire 2.4 GHz band
  • Only 0.7 dB insertion loss over the theoretical 6dB loss found in 4 port splitters
  • VSWR < 1.5:1
  • Supports up to 125 Watt transmitter power
  • Suitable for Omni or directional antennas or a combination thereof
  • Provides isolation between the output ports
  • Will not cause interference-producing intermodulation
  PDF Datasheet  
   
   

MODEL NO. : SP-242

Description

 SP-242 is a two-port antenna splitter that enables you to operate one radio with two antennas. It is optimized for maximum performance in the 2.4 GHz band. The model ASP-242 incorporates state of the art gmicrostriph technology using the gWilkinsonh circuit topology. No power supply is required for operation of this splitter.

Surgen Protector

      Features

  • Waterproof enclosure
  • Works equally well for both transmit and receive signals
  • Standard N-female connectors
  • Includes pole mounting hardware
  • Works with both FHSS and DSSS radio signals
  • Covers the entire 2.4 GHz band
  • Only 0.7 dB insertion loss over the theoretical 3dB loss found in 2 port splitters
  • VSWR < 1.5:1
  • Supports up to 2 Watt transmitter power
  • Extremely reliable stripline matching
  • Passes DC through it to enable dual amplifiers (one for each antenna)
  • Suitable for Omni or directional antennas or a combination thereof
  • Provides isolation between the output ports
  • Will not cause interference-producing intermodulation
PDF Datasheet
  
 




 
Product : Swivel Mount Kit
Material : Stainless Steel
Max Length : 19cm
Min Length : 12cm
Weight : 470g
Swivel Angle : 90 deg (Horz.)
    40 deg (Vert.)
Installment Guide (PDF)
Swivel Mount for Directional orientation
1. This mounting kit is recommend for supporting the Panel Antenna
2. High quality stainless construction ensures long lasting durability
3. Adjust the angle of Panel antenna to get the maximum reading
4. 1PG-24001 need one set mounting kit (HA-1001SU)
    1PG-24002 , 1PG-24003 , 1PG-24005C, 1PG-2421A ,1SC-2412 ,1SC-2418SP
     need two sets mounting kit (HA-1002SU)


 
 

 

No.23-2, Hungmau, Shing-feng Village, Shing-Feng, Hsin-Chu, Taiwan
TEL: +886-3-568-7918 FAX: +886-3-568-6953
E-mail: service@ep.com.tw